AFTERLIFE is our reverb pedal that does more and looks more fun than you\u2019re plain old reverb pedal. Sprung from a conversation with Young Widows, they sparked the idea for a reverb that is lush, controllable in decay, AND offers a second output that sends a totally wet reverbed signal with zero dry signal. You can send the second output to the second input of your amp or even your second amp for a bi-amp setup. When both outputs are utilized, a jangly, seasick, back and forth sound occurs. When the Repeats 1 knob is set to a longer repeats setting, you can get some insane oscillation! If R2 is dimed, when you hold down the left footswitch, you\u2019ll achieve hella oscillations! \u2026but wait! THERE\u2019S MORE!!! When the pedal is on\/active, you can use the 2nd footswitch to jump between \u201cRepeats 1\u201d and \u201cRepeats 2\u201d for two repeats settings (think short decay\/long oscillating decay). When the pedal is off, if the \u201cRepeats 2\u201d knob is fully clockwise, the second momentary footswitch sends oscillation to the second output. Please note that when the pedal is bypassed, output 2 will output NO sound (unless R2 is dimed and you\u2019re holding down the left footswitch). This is a Belton brick-based reverb based on the D Verb.<\/span><\/p>\n